Double Coated Polyethylene Foam Tapes 1600T
Description
Double Coated Polyethylene Foam Tapes 1600T: Industrial-Grade Bonding Solution for Electronics and Automotive Applications
High-performance Double Coated Polyethylene Foam Tapes 1600T, with a 0.07 mm (2.7 mil) closed-cell EPE foam carrier coated on both sides with superior acrylic adhesive, are Shangcheng's specialty. The company provides ISO 9001:2015 certified adhesive solutions with a peel adhesion strength of 15-20 N/25mm and a service temperature range of -20°C to 70°C. It operates out of a 3,000 square foot automated production facility. Shangcheng serves clients in more than 100 countries with dependable foam bonding performance for plastics, metals, and industrial mounting applications. With more than 12 years of industry experience, Shangcheng offers free samples within 48 hours and regular shipping for roll products in 3-5 days.
What Makes Double Coated Polyethylene Foam Tapes 1600T Unique
The tape offers outstanding sealing against moisture and dust intrusion because to its closed-cell polyethylene construction. It is perfect for demanding industrial settings because its acrylic adhesive solution provides both high initial tack and sustained shear strength.
The foam's density, which falls between 55 and 65 kg/m³, provides superior impact absorption and vibration dampening capabilities. This bonding solution disperses stress uniformly throughout the whole contact area, in contrast to conventional mechanical fasteners.
In severe weather, short-term exposure resistance can withstand temperatures as high as 90°C without compromising bond integrity. Long-term outdoor durability without deterioration is guarantyd by the UV-resistant formulation.
Technical Specifications
| Parameter | Value |
|---|---|
| Adhesive Type | Acrylic (Both Sides) |
| Backing Material | EPE Closed-Cell Foam |
| Tape Thickness | 0.07 mm (2.7 mil) |
| Foam Density | 55-65 kg/m³ |
| Peel Adhesion | 15-20 N/25mm |
| Service Temperature | -20°C to 70°C (Short-term: 90°C) |
| Product Color | White |
| Roll Width Options | 5mm to 600mm maximum |
| Roll Length Options | 3m to 33m maximum |
| Shelf Life | 24 months (proper storage) |
| Compliance | RoHS, REACH |
Key Application Scenarios
Automobile Sector
Die-cut gaskets fasten side moldings, nameplates, and emblems to car exteriors. Without sacrificing adhesive strength, the tape can tolerate severe weather cycles and fast vibrations. Clean, concealed attachment that does not require drilling is advantageous for interior trim components.
Assembly of Electronics
Foam is used as display spacers and battery cushions in cellphones and home appliances. Throughout the product lifecycle, its gap-filling qualities shield delicate components from shock and vibration.
Retail Displays and Signage
This adhesive solution makes mounting metal and plastic signs to textured walls simple. In commercial shelf systems, it substitutes rivets and screws with invisible connections that preserve visual appeal.
Industrial Machinery
The tape's capacity to fuse disparate materials together is advantageous for general mounting applications. In challenging industrial settings, its robust structural PE foam can handle heavy weights, powerful peeling pressures, and external impacts.
Performance Advantages
Better Stickiness on Polymers
On a variety of plastic surfaces, including difficult substrates, the acrylic coating works remarkably effectively. While final binding strength gradually increases over 72 hours, initial tack enables instant positioning.
Integrity of Structure
Under constant load, the polyethylene foam carrier resists deformation. Throughout the product's service life, gap-filling uniformity is maintained by this structural stability.
Superior Processing Characteristics
Die-cutting and kiss-cutting processes run smoothly thanks to Grafix release paper. By processing the tape effectively, automated dispensers help minimize assembly line bottlenecks.
Resistance to the Environment
Water absorption and moisture transport are prevented by closed-cell structure. Between 0 and 95% relative humidity, the glue remains effective.
Understanding Bond Development
Adhesive flow onto the substrate surface after application progressively strengthens the bond. About half of the eventual bond strength develops in 20 minutes at room temperature.
The relationship reaches 90% of its maximum strength after 24 hours. After 72 hours of contact time, full adhesion capacity is reached.
Adhesive wet-out is accelerated by high temperatures. One hour of exposure to 66°C can speed up the formation of complete bond strength and possibly improve total adhesion.
Bond build rate is greatly impacted by surface preparation. Adhesive flow on low-surface-energy polymers like polypropylene and polyethylene is improved by using primers like 3M Primer 94 or abrading surfaces with 180-grit sandpaper.

Quality Control Standards
Peel Adhesion Testing (ASTM D3330)
Measures force required to remove tape from stainless steel plates. This verifies adhesive consistency across production batches and ensures reliable bonding performance.
Static Shear Strength (ASTM D3654)
Tests the tape's resistance to slippage under constant load. Evaluations occur at both room temperature and elevated conditions to simulate real-world stress scenarios.
Thickness Uniformity Inspection
Digital micrometers verify foam carrier maintains ±10% tolerance. Consistent thickness ensures predictable gap-filling in precision assembly applications.
Accelerated Aging Tests
Samples undergo exposure to 70°C and 90% humidity for 72 hours. This simulates multi-year outdoor durability and confirms adhesive chemical stability under environmental stress.
Dimensional Tolerance Verification
Digital imaging systems check die-cut shapes stay within ±0.2mm specifications. Precision cutting preserves adhesive integrity while enabling rapid assembly line installation.

Storage and Handling Guidelines
Double Coated Polyethylene Foam Tapes 1600T should be kept in their original cartons between 4 and 38°C and 0 and 95% relative humidity. 22°C and 50% relative humidity are ideal.
For 24 months following the date of manufacture, the product maintains its full functionality and qualities when stored correctly. To preserve freshness, rotate inventory utilizing first-in, first-out procedures.
Before used, adjust the tape to the temperature of the application environment. When transferring rolls from cold storage to heated assembly areas, give them at least a day to stabilize.

Frequently Asked Questions
Q: For optimal adhesion, what surface preparation is necessary?
A: Surfaces need to be dry, clean, and devoid of impurities or oils. Before applying tape, wipe with a 50:50 isopropyl alcohol and water solution and let it completely evaporate.
Q: Is this tape appropriate for long-term outdoor installations?
A: Indeed, the closed-cell PE foam and acrylic glue provide superior moisture and UV protection. For high-heat situations with continuous exposure to temperatures above 70°C, carefully calculate load limitations.
Q: Does die-cutting impact the characteristics of adhesives?
A: Adhesive integrity is maintained with expert die-cutting. Without sacrificing bonding performance, kiss-cutting on liner backing greatly accelerates assembly line application.
Q: Can low-surface-energy polymers be bonded to with this tape?
A: Although the tape offers a strong initial tack, in order to attain structural bond levels for demanding applications, LSE polymers such as polypropylene or polyethylene may need surface primers.
Q: If the tape is applied at a low temperature, what will happen?
A: Bond construction time is prolonged at temperatures below 15°C because adhesive flow slows. For best results, preheat substrates and tape to at least 21°C before applying.
Contact Us
Discover how Double Coated Polyethylene Foam Tapes 1600T can solve your bonding challenges. Contact our technical team at sale@densemate.com for free samples, custom die-cutting specifications, and application guidance tailored to your project requirements.
Online Message
YOU MAY LIKE
Here we will showcase some of our main products