VHB Tape 4920
Description
VHB Tape 4920 – High-Performance Acrylic Foam Bonding Solution for Industrial and Electronic Applications
Shangcheng offers industrial-grade VHB Tape 4920, a white double-coated acrylic foam tape that is 0.4 mm (0.015 inch) thick and designed for long-lasting bonding in a variety of demanding applications. This firm foam tape, which is produced in our 3,000-square-foot ISO 9001:2015 certified factory in Dongguan, has general-purpose acrylic adhesive on both sides, providing dependable binds to high surface energy plastics, metals, glass, and paints. VHB Tape satisfies the demanding requirements of appliance assembly, signs fabrication, metalworking, and general industrial projects with continuous operating temperatures as high as 149°C (300°F) and a densified kraft paper liner for precise conversion. With more than 12 years of experience with adhesives, Shangcheng provides flexible OEM/ODM die-cutting services and quick sampling within 48 hours to meet your production deadlines.

Why Choose VHB Tape 4920 for Your Bonding Challenges
When combining dissimilar metals, traditional mechanical fasteners cause point-load stress, necessitate surface polishing, and increase the danger of galvanic corrosion. By continuously spreading tension across connected surfaces, this tape resolves such problems.
There are no visible rivets or welds, giving you a smooth, attractive finish. By absorbing viscoelastic energy, the solid acrylic foam core lowers vibration and impact stress in assembled parts.
Its 0.4 mm profile complements compact, space-constrained designs flawlessly. Whether you are building electronic housings, adhering appliance trim, or putting up signage panels, this method offers structural solidity without adding bulk.
The closed-cell foam structure creates a durable barrier against moisture and chemicals. This suggests that your relationships hold up well in outdoor or humid production environments.
Technical Specifications
| Property | Value |
|---|---|
| Adhesive Type | Acrylic (Both Sides) |
| Foam Type | Firm |
| Total Thickness | 0.4 mm (0.015 in.) |
| Product Color | White |
| Liner Material | Densified Kraft Paper |
| Core Size | 3 in. |
| Maximum Operating Temperature | 149°C (300°F) |
| Application Environment | Indoor/Outdoor |
| Available Roll Widths | 5mm, 6mm, 10mm, 20mm, 30mm, 60mm, 100mm, 200mm, 300mm, 600mm (maximum) |
| Available Roll Lengths | 3m, 4.7m, 5.5m, 6.6m, 33m (maximum) |
| Target Industries | Appliance, Signage, Metalworking, General Industrial, Electronics |
Key Applications Across Industries
Manufacturing of Signage and Display
Attach thin plastic or metal faces to internal frames without using any obvious fasteners. The continuous bond satisfies wind load and vibration standards while guaranteeing a tidy, expert appearance.
Assembly of Appliances
Internal brackets, ornamental trim, and bond control panels. Production ovens and end-use heat cycling are handled by the tape's temperature resistance without causing bond breakage.
Telecommunications and Electronics
Assemble housing assemblies, attach PCB components, and fasten stiffeners in LCD panels. Tight tolerances in tiny device designs are maintained by the low-profile thickness.
Fabrication and Metalworking
Connect disparate metals without worrying about galvanic corrosion. In thin-gauge materials where heat distortion must be prevented, replace spot welds.
Components of Transportation
Attach nameplates, decorative accents, and interior trim. Road vibration and passenger compartment noise are reduced by the energy absorption of the foam.

Surface Preparation and Application Best Practices
Bond success is determined by proper surface preparation. Before using the tape, clean the majority of substrates using a 70/30 solution of isopropyl alcohol (IPA) and water.
Use a degreaser or solvent-based cleaner before applying the IPA/water solution on surfaces that have a lot of oil or grease.
Adhesion is enhanced and contact area is increased by abrading oxidized or rough surfaces. Use IPA and water to completely clean after abrasion.
For dependable bonding, low surface energy polymers can need 3M Tape Primer 94 or Adhesion Promoter 111.
Before applying tape, porous materials like concrete or wood must be sealed to form a cohesive surface.
Application Temperature and Pressure
For best results, apply the tape between 21°C and 38°C (70°F and 100°F). 10°C to 15°C (50°F to 60°F) is the lowest application temperature.
The glue becomes too hard to adequately flow onto the substrate below these temperatures.
Make sure the tape is applied at a pressure of about 100 kPa (15 psi) by using strong roller or platen pressure. Maximum adhesive contact is developed with this pressure.
Development of Bond Strength
You will reach about 50% of ultimate bond strength at room temperature within 20 minutes, 90% after 24 hours, and 100% after 72 hours.
Adhesive flow and bond development are accelerated by higher temperatures. One hour of exposure to 66°C (150°F) can hasten wet-out and potentially strengthen the final bond.

Customization and OEM Services
In order to transform VHB Tape 4920 into unique forms, gaskets, and parts for automated assembly, Shangcheng offers precise die-cutting services.
After drawing validation, our production team uses your CAD drawings to produce tight-tolerance parts in 7–10 days.
Typical roll products are shipped in three to five days. Within 48 hours, free samples are available (shipping only).
We provide OEM branding, personalized packaging, and adhesive solutions that are suited to your particular substrate and environmental needs.
FAQ
Q: Which substrates form the strongest bonds with VHB Tape?
A: Aluminum, steel, stainless steel, glass, sealed wood, powder-coated surfaces, and high surface energy plastics like polycarbonate and acrylic all adhere to this tape fairly well.
Q: What makes VHB Tape different from VHB 4930?
A: Thickness is the main distinction. The dimensions of VHB Tape and 4930 are 0.4 and 0.6 mm, respectively. If you want tighter tolerances and fewer bond lines, go with 4920.
Q: Does this tape withstand exposure to UV light outside?
A: Yes. Closed-cell acrylic foam is appropriate for outdoor signage and architectural applications because of its resilience to moisture intrusion and UV damage.
Q: Can VHB Tape be used in cold climates?
A: The tape works well at low temperatures when positioned correctly. For optimal adhesive flow, the initial application temperature should be higher than 10°C (50°F).
Q: If I need to get rid of VHB Tape, how can I do it?
A: After the glue has been weakened by heating the bond line to around 60°C (140°F), carefully remove it using a plastic scraper and adhesive remover.
Q: Does the tape withstand solvents and chemicals?
A: Long-term durability in challenging environments is ensured by the closed-cell foam's exceptional resistance to the majority of industrial solvents, fuels, oils, and mild acids.
Contact Us for Technical Support and Quotations
Need VHB Tape 4920 custom sizes, technical datasheets, or application guidance? Our team provides professional support for your bonding challenges. Reach us at sale@densemate.com for fast quotations, free samples, and expert recommendations tailored to your project requirements.
Online Message
YOU MAY LIKE
Here we will showcase some of our main products